TEN 50-4815WI

DC/DC Converter TEN 50WI Series, 50 Watt • Very high power density: 50 W in 1” x 2” x 0.4” package • • • Wide 4:1 input range • • • • • Protection against over-temperature Excellent efficiency up to 92 % Operating temperature range –40°C to +80°C UL 62368-1 IEC 62368-1 The TEN 50WI Series is a range of isolated high performance DC/DC converter modules. With a very high efficiency of up to 92% and the use of highest reliable components these 50 W converters can be packed into the standard 1.0” x 2.0” casing. The 10 models have a wide 4:1 input voltage range and a tight output voltage regulation. They do not need a minimum load and offer a high efficiency also at low load conditions. The output voltage is adjustable by external resistor. Remote On/Off and protection against overload and short circuit are standard features of these converters. Typical applications are in mobile equipment, instrumentation, distributed power architectures in communication and industrial electronics and everywhere where space on the PCB is critical. Output voltage adjustable Remote On/Off I/O isolation 1500 VDC 3-year product warranty Models Order Code Input Voltage Output Voltage Output Current Efficiency Range nom. (adjustable) max. typ. TEN 50-2410WI 3.3 VDC (2.97 - 3.63 VDC) 10'000 mA 90 % TEN 50-2411WI 5 VDC (4.5 - 5.5 VDC) 10'000 mA 91 % 12 VDC (10.8 - 13.2 VDC) 4'170 mA 92 % 15 VDC (13.5 - 16.5 VDC) 3'330 mA 92 % 9 - 36 VDC (24 VDC nom.) TEN 50-2412WI TEN 50-2413WI TEN 50-2415WI 24 VDC (21.6 - 28.8 VDC) 2'080 mA 91 % TEN 50-4810WI 3.3 VDC (2.97 - 3.63 VDC) 10'000 mA 90 % TEN 50-4811WI 18 - 75 VDC (48 VDC nom.) TEN 50-4812WI TEN 50-4813WI TEN 50-4815WI 5 VDC (4.5 - 5.5 VDC) 10'000 mA 91 % 12 VDC (10.8 - 13.2 VDC) 4'170 mA 92 % 15 VDC (13.5 - 16.5 VDC) 3'330 mA 92 % 24 VDC (21.6 - 28.8 VDC) 2'080 mA 91 % Options TEN-HS6 - Optional Heat Sink: www.tracopower.com/products/ten-hs6.pdf www.tracopower.com September 20, 2023 Page 1 / 4 TEN 50WI Series, 50 Watt Input Specifications Input Current 24 Vin models: 80 mA typ. (3.3 Vout model) 60 mA typ. (5 Vout model) 80 mA typ. (12 Vout model) 80 mA typ. (15 Vout model) 80 mA typ. (24 Vout model) 48 Vin models: 40 mA typ. (3.3 Vout model) 30 mA typ. (5 Vout model) 60 mA typ. (12 Vout model) 60 mA typ. (15 Vout model) 50 mA typ. (24 Vout model) 24 Vin models: 1'528 mA typ. (3.3 Vout model) 2'290 mA typ. (5 Vout model) 2'267 mA typ. (12 Vout model) 2'263 mA typ. (15 Vout model) 2'286 mA typ. (24 Vout model) 48 Vin models: 764 mA typ. (3.3 Vout model) 1'145 mA typ. (5 Vout model) 1'134 mA typ. (12 Vout model) 1'134 mA typ. (15 Vout model) 1'143 mA typ. (24 Vout model) 24 Vin models: 50 VDC max. (100 ms max.) 48 Vin models: 100 VDC max. (100 ms max.) 24 Vin models: 7.5 VDC typ. 48 Vin models: 16 VDC typ. 24 Vin models: 40 mAp-p typ. 48 Vin models: 30 mAp-p typ. 24 Vin models: 1'000 mA (slow blow) 48 Vin models: 500 mA (slow blow) (The need of an external fuse has to be assessed in the final application.) Internal LC-Type - At no load - At full load Surge Voltage Under Voltage Lockout Reflected Ripple Current Recommended Input Fuse Input Filter Output Specifications Output Voltage Adjustment See application note: Voltage Set Accuracy Regulation Ripple and Noise (20 MHz Bandwidth) Capacitive Load - Input Variation (Vmin - Vmax) - Load Variation (0 - 100%) 3.3 Vout models: 5 Vout models: 12 Vout models: 15 Vout models: 24 Vout models: 3.3 Vout models: 5 Vout models: 12 Vout models: 15 Vout models: 24 Vout models: Minimum Load Temperature Coefficient Start-up Time –10% to +20% (24 Vout models) ±10% (other single models) (By external trim resistor) www.tracopower.com/overview/ten50wi Output power must not exceed rated power! ±1% max. 0.5% max. 0.5% max. 100 mVp-p max. (w/ 1 µF MLCC || 10 µF TC) 100 mVp-p max. (w/ 1 µF MLCC || 10 µF TC) 150 mVp-p max. (w/ 1 µF MLCC || 10 µF TC) 150 mVp-p max. (w/ 1 µF MLCC || 10 µF TC) 150 mVp-p max. (w/ 1 µF MLCC || 10 µF TC) 26'000 µF max. 17'000 µF max. 3'000 µF max. 2'000 µF max. 750 µF max. Not required ±0.02 %/K max. 30 ms max. (Power On) 30 ms max. (Remote On) All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com September 20, 2023 Page 2 / 4 TEN 50WI Series, 50 Watt Short Circuit Protection Output Current Limitation Transient Response Continuous, Automatic recovery 150% typ. of Iout max. 3% typ. / 5% max. (75% to 100% Load Step) 250 µs typ. (75% to 100% Load Step) - Response Deviation - Response Time Safety Specifications Safety Standards EN 60950-1 EN 62368-1 IEC 60950-1 IEC 62368-1 UL 60950-1 UL 62368-1 www.tracopower.com/overview/ten50wi PD 3 Not mains connected - IT / Multimedia Equipment - Certification Documents Pollution Degree Over Voltage Category EMC Specifications EMI Emissions - Conducted Emissions - Radiated Emissions External filter proposal: EMS Immunity - Electrostatic Discharge Air: Contact: - RF Electromagnetic Field - EFT (Burst) / Surge External filter proposal: - Conducted RF Disturbances EN 55032 class A (with external filter) EN 55032 class B (with external filter) FCC Part 15 class A (with external filter) EN 55032 class A (with external filter) FCC Part 15 class A (with external filter) www.tracopower.com/overview/ten50wi EN 55024 (IT Equipment) EN 55035 (Multimedia) EN 61000-4-2, ±8 kV, perf. criteria A EN 61000-4-2, ±6 kV, perf. criteria A EN 61000-4-3, 10 V/m, perf. criteria A EN 61000-4-4, ±2 kV, perf. criteria A EN 61000-4-5, ±1 kV, perf. criteria A www.tracopower.com/overview/ten50wi EN 61000-4-6, 10 Vrms, perf. criteria A General Specifications Relative Humidity Temperature Ranges - Operating Temperature Power Derating - Case Temperature - Storage Temperature - High Temperature Over Temperature Protection Switch Off Cooling System Remote Control 95% max. (non condensing) –40°C to +80°C –40°C to +85°C (with Heat Sink) +105°C max. –50°C to +125°C Depending on model See application note: www.tracopower.com/overview/ten50wi 110°C typ. - Protection Mode - Voltage Controlled Remote - Off Idle Input Current - Remote Pin Input Current Altitude During Operation Switching Frequency Insulation System Isolation Test Voltage Isolation Resistance Isolation Capacitance - Input to Output, 60 s - Input to Output, 1 s - Input to Output, 500 VDC - Input to Output, 100 kHz, 1 V Natural convection (20 LFM) On: 3.5 to 12 VDC or open circuit Off: 0 to 1.2 VDC or short circuit Refers to 'Remote' and '-Vin' Pin 2.5 mA typ. -0.5 to 0.5 mA 6'000 m max. 285 kHz typ. (PWM) Functional Insulation 1'500 VDC 1'800 VDC 1'000 MΩ min. 2'200 pF max. All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com September 20, 2023 Page 3 / 4 TEN 50WI Series, 50 Watt Reliability Washing Process - Calculated MTBF 230'000 h (MIL-HDBK-217F, ground benign) According to Cleaning Guideline www.tracopower.com/info/cleaning.pdf Alu alloy, black anodized coating Non-conductive FR4 (UL 94 V-0 rated) Epoxy (UL 94 V-0 rated) Copper Alloy (C6801) Nickel (2.5 µm min.) Gold (75 - 125 nm), glossy Metal Case PCB Mount THD (Through-Hole Device) 2" x 1" Lead-Free Wave Soldering 260°C / 10 s max. 34 g - Case to Ambient 12 K/W typ. 10 K/W typ. (with Heat Sink) www.tracopower.com/info/reach-declaration.pdf REACH SVHC list compliant REACH Annex XVII compliant www.tracopower.com/info/rohs-declaration.pdf Exemptions: 7a (RoHS exemptions refer to the component concentration only, not to the overall concentration in the product (O5A rule).) cb619863-d838-4b4f-a2ec-b819f3151448 Housing Material Base Material Potting Material Pin Material Pin Foundation Plating Pin Surface Plating Housing Type Mounting Type Connection Type Footprint Type Soldering Profile Weight Thermal Impedance Environmental Compliance - REACH Declaration - RoHS Declaration - SCIP Reference Number Supporting Documents Overview Link (for additional Documents) www.tracopower.com/overview/ten50wi 2.54 5 3 3.6 (0.14) 1.85 (0.073) (0.400) Bottom view Pinout 25.4 (1.00) (0.400) 10.16 2 (0.400) 4 1 10.16 10.16 5.08 (0.200) 50.8 (2.00) (0.100) Outline Dimensions 6 11.0 (0.43) 5.5 (0.22) 45.72 (1.800) Pin Single 1 +Vin (Vcc) 2 –Vin (GND) 3 Remote On/Off 4 +Vout 5 –Vout 6 Trim Ø1.0 (Ø0.04) Dimensions in mm (inch) Tolerances: x.x ±0.25 (x.xx ±0.01) x.xx ±0.13 (x.xxx ±0.005) Pin diameter tolerances: x.x ±0.05 (x.xx ±0.002) © Copyright 2023 Traco Electronic AG Specifications can be changed without notice. www.tracopower.com Rev. September 20, 2023 Page 4 / 4